See the chart below to see how different types of solar panel installations compare in Jim Thorpe.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day).
* See glossary & definitions below.
Based on historical Jim Thorpe, PA data, solar panels that are tilted towards the equator at an angle equal to the latitude will produce the maximum solar energy output in Jim Thorpe. [1]
Jim Thorpe has an average monthly Global Horizontal Irradiance (GHI) of 3.84 kilowatt hours per square meter per day (kWh/m2/day), which is approximately 6% greater than the average monthly Direct Normal Irradiance (DNI) of 3.63 kWh/m2/day. [1]
Solar installations in Jim Thorpe that are always titled at the latitude of Jim Thorpe (Average Tilt at Latitude or ATaL) average 4.47 kWh/m2/day, or about 16% greater than the average monthly GHI of 3.84 kWh/m2/day and approximately 23% greater than the average monthly DNI of 3.63 kWh/m2/day. [1]
Global Horizontal Irradiance: The total amount of solar radiation that is received per unit area by a surface that is always positioned in a horizontal manner.
Direct Normal Irradiance: The total amount of solar radiation received per unit area by a surface that is always perpendicular to the sun rays that come in a straight line from the direction of the sun at its current position in the sky.
Average Tilt at Latitude: The total amount of solar radiation received per unit area by a surface that is tilted toward the equator at an angle equal to the current latitude. ATaL will often produce the optimum energy output.
See the chart below for monthly solar radiation levels in Jim Thorpe.
* Amounts listed in kWh/m2/day (kilowatt hours per square meter per day)
Jim Thorpe, PA has a average annual solar radiation value of 4.7 kilowatt hours per square meter per day (kWh/m2/day). [1]
The month with the highest historical solar radition values in Jim Thorpe is July with an average of 5.84 kWh/m2/day, followed by August at 5.63 kWh/m2/day and May at 5.47 kWh/m2/day. [1]
The three months that historically average the lowest average solar radiation levels in Jim Thorpe (Pennsylvania) are December with an average of 2.75 kWh/m2/day, followed by November with an average of 3.56 kWh/m2/day and January at 3.58 kWh/m2/day. [1]
The average monthly solar radiation level in Jim Thorpe, PA, of 4.7 kilowatt hours per square meter per day (kWh/m2/day) is approximately 20% greater than the average level of 3.93 kWh/m2/day in a city with historically low levels (WA) and is approximately 29% less than the average level of 6.61 kWh/m2/day in a city with historically high levels (NV). [1]
→ Values listed as 0 (zero) are not available (N/A).
Below is a month-by-month comparison of how average Jim Thorpe solar radiation levels compare to average levels in a city with historcially high levels (NV) and a city with historically low levels (WA). [1]
→ k/m/d = kWh/m2/day = kilowatt hours per square meter per day.
→ Values listed as 0 (zero) are not available (N/A).
We do not currently have data on solar panel installations in the borough of Jim Thorpe, PA at this current time.
Monthly AC solar system output averages for Jim Thorpe (pa). Month-by-month solar power, as ranked by AC output, in Jim Thorpe. [2]
* Amounts listed in kWhac (kilowatt hours (AC))
Jim Thorpe (PA) has a average annual solar AC output value of 5211.51 kilowatt hours (AC). [2]
The month with the highest historical solar power output in Jim Thorpe is July with an average of 527.71 kWhac, followed by May at 508.41 kWhac and August at 507.83 kWhac. [2]
The three months that historically average the lowest average solar output levels in Jim Thorpe (Pennsylvania) are December with an average of 277.59 kWhac, followed by November with an average of 335.87 kWhac and January at 356.98 kWhac. [2]
Sorry, Jim Thorpe residential electricity prices are currently unavailable.
Please check back later.
Vote now: Given all of the data and analysis provided for Jim Thorpe, is solar power a good choice for residents of this borough?
Sorry, Pennsylvania residential natural gas prices are currently unavailable.
Please check back later.
|
|
The borough of Jim Thorpe, PA in Carbon County has an approximate population of 4,781. [6]
To learn more about solar energy and solar power Jim Thorpe, PA, or for more solar-related resources for Jim Thorpe, visit the U.S. Energy Information Administration.
Nineteen-year-old Edmund Becquerel, a French experimental physicist, discovered the basis of solar energy in 1839.
Take the first step toward powering your home with solar energy.
Start now with an online solar savings estimate.
